[Guide] How to Flash Stock Firmware of Moto G 3rd Gen 2015 [All Variants]

Today I will tell you how can you flash Stock Rom or Firmware of Motorola Moto G 3rd Gen 2015 that comes with android lollipop 5.1.1. in 1GB ram ,8GB internal and 2GB ram ,16GB internal variants.You can download stock Factory image of all variants of Moto G 3rd Generation.Thanks to lost101 XDA member for uploading Stock Firmware of All variants of Moto g3 gen 2015.

 

Stock firmware is very useful in many case like if you want to revert back to Stock Rom from any custom roms Like CM 12,Pac rom,Resurrection remix  remix,Slim Lp and many more or is you faced any bootloop while flashing any custom roms or if you forget to take that stock nandroid backup while flashing any rom.

This will also help in unbricking your Moto G 3rd gen easily if you bricked it by flashing any wrong thing.So lets start the step by step guide to Flash Stock rom in Moto G 3rd gen.

Warning The author is not responsible, if you damage or brick your device. Do it at your own risk and follow the instructions properly.

Note:Only flash The Stock Rom of your device Variant.

►Included stock Firwmares are of XT1540  , XT1541 , XT1542 , XT1543 , XT1544 , XT1548 , XT1550 Motorola Moto G 3rd generation .
►Included both for 1GB and 2 GB variants.


#How to Install Stock Firmware of Moto G 3rd gen

 
1.Download Motorola Drivers ,minimal Adb fastboot Drivers and Download Moto G 3rd gen Stock Firmware from bottom of this page.

2.Now install Motorola Driver and ADb Fastboot driver on the desktop.Then extract stock firmware in the ADB fastboot folder.

3.Now Press Shift and Right click any where in the ADB fastboot folder and Click on open command prompt here.

4.Now Turn Of your device and turn on by pressing volume down button and Power button simultaneously until you boots into Bootloader as like below image

 

 

5.Then Connect your device with your computer via usb cable