[STOCK] MOTO X PLAY XT1562 STOCK 6.0.1 MARSHMALLOW ROM + FLASHING GUIDE [23/03/2016] [OTA]

OFFICIAL MOTO X PLAY XT1562 STOCK 6.0.1 MARSHMALLOW ROM

This Tutorial shows how to flash Moto X Play with official Stock Marhsmallow ROM 6.0.1 [NEW]
CREDITS: #Eshwag Reddy
(For GDrive Mirror Link)

OTA LINKS ALSO ADDED !!!
PREREQUISITES
1. VERIFY YOUR DEVICE MODEL NUMBER IS XT1562.
2. ENABLE DEVELOPER SETTINGS.
3. ENABLE USB DEBUGGING AND AND TRUST THE CONNECTION.
4. DOWNLOAD ADB INSTALLER, FASTBOOT, AND ROM.ZIP
5. MAKE SURE THE DEVICE IS FULLY CHARGED.

FLASHING INSTRUCTIONS

Step 1: Download Moto X play 6.0.1 Firmware zip, Adb installer and Fastboot Zip from the below download section.

Step 2: Create a New Folder with any name inside C Drive (C:\) .

Step 3: Extract Fastboot Zip to the newly created folder inside C:\ .

Step 4: Extract the Firmware zip inside the same newly created folder.

Step 5: Run Adb Installer application file.
( IMPORTANT: Right Click Adb Installer and select "Run as Administrator" )

Step 6: Activate Developer Setting by tapping Build number 7-times in "About Phone" Section.

Step 7: Connect your Mobile and Enable "USB debugging" from Developer Settings.

Step 8: Trust the connection by checking "Always allow from this computer" when you plug in the device for the first time.

Step 9: Run "reboot.bat" file to boot into Bootloader / Fastboot.

Step 10: After rebooting into Bootloader / Fastboot, Run "flash.bat" file to start flashing the ROM 6.0.1.

Step 11: Wait Till it asks you to "Press Any key to Continue" in command prompt.

Step 12: Reboot the mobile, it takes several minutes to boot the device with a newer version.